CH Groove Mixer
DESCRIPTION
It is particularly suitable for mixing powder or damp materials that required high uniformity and high specific gravity.
FEATURES
1. The raw materials contact area is made by stainless steel.
2. The gap between machine body and blades is small.
3. There is no dead corner in mixer.
4. The stirring shaft has sealing device in both ends to prevent the raw materials leaking out.
APPLICATION
This machine is widely used in many industries such as pharmaceutical industry, foodstuff industry, chemical industry, electronics industry, and etc.
Technical Parameter
capacity(L) | 100 | 150 | 200 | 400 |
Power of motor (kw) | 2.2 | 3 | 3 | 5.5 |
Speed of stirring (rpm) | 24 | 24 | 24 | 24 |
Inclined (×) | 105 | 105 | 105 | 105 |
Weight (kg) | 350 | 500 | 650 | 1200 |
Overall dimensions (mm) | 1400×500×1000 | 1600×600×1100 | 1800×700×1200 | 2000×820×1460 |
The bulk density of material is made based on 0.6g/cm3, Please point out if it’s over .
- 2018-10-06 > Analysis on the Application of Eight Drying Equipments in Chemical Pharmaceutical Industry
- 2018-06-15 > Application of spray drying desulfurization technology in protecting ecological environment
- 2018-04-16 > Comparison of powder extraction rate between traditional Chinese medicine extract and high speed spray dryer
- 2018-02-22 > Development status and characteristics of high efficiency mixing granulator for calcium carbonate industry
- 2017-11-04 > Belt dryers are common faults and maintenance during use
- 2017-09-21 > Application range and selection of belt dryer
- 2017-06-30 > Safe use of hot air circulation oven and four points of attention
- 2017-04-06 > The rice dryer market will also see new trends
- 2017-02-01 > Four major process design methods for rotary flash dryer